LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 162 (545RFE Automatic Transmission (Service Information)) >> Seal, Output Shaft >> Removal >> Removal

Seal, Output Shaft: Removal: Removal

WARNING: This page is about a different car, the 2012 RAM Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear drive shaft. Refer to SHAFT, DRIVE, REAR LIGHT DUTY, REMOVAL or SHAFT, DRIVE, REAR HEAVY DUTY, REMOVAL .
  2. Using a seal removal tool, remove rear extension housing output shaft seal.
scientia non olet · About LEMON Manuals