LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1618 ((Radio Frequency (RF Hub) Module - Electrical Diagnostics - 2500 Hd)) >> DTC Troubleshooting >> B215B-11-Ignition Run/Start 2 Control - Circuit Short To Ground >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Whenever the Radio Frequency Hub (RF Hub) senses a short to ground on the F20 Ignition Run/Start Output circuit, this code will set.

NOTE:

This F20 circuit is a sense circuit from the Radio Frequency Hub to the Body Control Module. It has a maximum draw of 10 mA.

scientia non olet · About LEMON Manuals