LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1609 ((Amplifier (Amp) - Electrical Diagnostics - 2500 Hd)) >> DTC Troubleshooting >> B1488-00-Cabin Eq Mismatch Performance >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

If the Cabin Equalization Curve number message from the Body Control Module (BCM) is not the same as the Cabin Equalization Curve number stored in the Amplifier for 10 consecutive cycles, then the Amplifier (AMP) will set this DTC.

scientia non olet · About LEMON Manuals