LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1592 (Electronic Control Modules - (Service Information) - 2500 Hd) >> Module, Final Drive Control (FDCM) >> Operation >> Notes

Module, Final Drive Control (FDCM): Operation: Notes

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

During normal operation of the FDCM control module uses bussed inputs for vehicle speed and transfer case position to manage stabilizer bar disconnect actuator and front and rear axle lockers. These features will provide feedback to the driver and communicates over the CAN C network.

scientia non olet · About LEMON Manuals