Tailpipe, Exhaust: Removal: 6.4L
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
- Saturate the clamp nut with heat valve lubricant and allow 5 minutes for penetration.
- Remove the tailpipe to muffler clamp (1).
- Disconnect the tailpipe from the isolator (2).
- Separate the tailpipe from the muffler and remove the tailpipe.