LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1589 (Exhaust System - 2500 Hd) >> Sensor, Exhaust Temperature >> Removal >> Exhaust Gas Temperature Sensor 1/1

Exhaust Gas Temperature Sensor 1/1

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate both of the negative battery cables.
  2. Raise and support vehicle. Refer to HOISTING, STANDARD PROCEDURE .
    GC0179979Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the exhaust temperature sensor wire harness connector (1).
    GC0179962Courtesy of CHRYSLER GROUP, LLC
  4. Remove the exhaust temperature sensor (1).
scientia non olet · About LEMON Manuals