Pipe, Exhaust Extension: Installation: 6.4L
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Install the exhaust extension pipe and connect the hanger isolators (2) to the exhaust extension pipe.
- Tighten extension pipe to Y-pipe band clamp nuts (1) to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
- Install the muffler and tail pipe (3). Refer to MUFFLER, EXHAUST, INSTALLATION .
- Check the exhaust system for contact with the body panels. A minimum of 25 mm (1.0 in.) is required between the exhaust system components and body/frame parts. Make the necessary adjustments, if needed.