Pipe, Exhaust Extension: Installation: 5.7L
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Install the exhaust extension pipe (2) and tighten band clamp nuts (1) to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
- Install the muffler. Refer to MUFFLER, EXHAUST, INSTALLATION .
- Check the exhaust system for contact with the body panels. A minimum of 25 mm (1.0 in.) is required between the exhaust system components and body/frame parts. Make the necessary adjustments, if needed.