Torque Specifications
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
G56 MANUAL TRANSMISSION TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Fill Plug | 57 | 42 | - |
| Drain Plug | 57 | 42 | - |
| Front to Rear Housing Bolts | 58 | 43 | - |
| Input Shaft Retainer Bolts | 23 | 17 | - |
| Shift Tower bolts | 23 | 17 | - |
| 5-6 Shift Fork Bolts | 58 | 43 | - |
| Shift Rail Support bolts | 58 | 43 | - |
| Reverse Idler Gear Shaft Bolt | 58 | 43 | - |
| P.T.O. Cover Bolts | 58 | 43 | - |
| Clutch Release Pivot Ball | 22 | 16 | - |
| 4X2 Output Shaft Flange Bolt | 260 | 190 | - |
NOTE:
Two different transmission gear ratios are used. To verify, look at the last two letters on the transmission bar code label. The last two letters on the bar code located on the right side of the transmission will be AD or AE.
AD - GEAR RATIO
| GEAR | RATIO |
|---|---|
| FIRST | 6.29 |
| SECOND | 3.48 |
| THIRD | 2.10 |
| FOURTH | 1.38 |
| FIFTH | 1.00 |
| SIXTH | 0.79 |
| REVERSE | 5.74 |
AE - GEAR RATIO
| GEAR | RATIO |
|---|---|
| FIRST | 5.94 |
| SECOND | 3.28 |
| THIRD | 1.98 |
| FOURTH | 1.31 |
| FIFTH | 1.00 |
| SIXTH | 0.74 |
| REVERSE | 5.42 |