LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1584 (5.7L Engine CNG - (Service Information) - 2500 Hd) >> Lubrication >> Sensor, Oil Pressure >> Installation

Sensor, Oil Pressure: Installation

WARNING: This page is about a different car, the 2018 RAM 2500 HD and 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0088117Courtesy of CHRYSLER GROUP, LLC
NOTE:

Apply Mopar® Thread Sealant with PTFE to the sensor threads with before installing into the engine block.

  1. Install the oil pressure sensor (1).
    GC0088116Courtesy of CHRYSLER GROUP, LLC
  2. Connect the oil pressure sensor electrical connector (1).
  3. Connect the negative battery cable.
scientia non olet · About LEMON Manuals