LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1575 (6.7L Diesel - DTCS P24A2 To U3017 - 2500 Hd) >> DTC Troubleshooting >> P24D1-Particulate Matter Sensor Regeneration Incomplete >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

The PM Sensor Module fails to transition from regeneration to measurement mode two separate times. The PCM will light the Malfunction Indicator Lamp (MIL) if this diagnostic runs and fails in 2 consecutive drive cycles. The PCM will turn off the MIL when the diagnostic runs and passes in 4 consecutive drive cycles.

scientia non olet · About LEMON Manuals