LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1562 (Steering System - 2500 Hd) >> Diagnosis And Testing >> Power Steering Flow And Pressure >> Diesel Engine Tool Connections

Diesel Engine Tool Connections

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0174942Courtesy of CHRYSLER GROUP, LLC
  1. Connect Hose Assembly (special tool #6959, Assembly, Hose) (1) to the valve side of Power Steering Analyzer (special tool #6800, Analyzer, Power Steering) (3), and connect Adapter (special tool #8185-2, Adapter, Power Steering Tester) (2) to the hose assembly.
  2. Connect Power Steering Hose (special tool #6713, Hose, Power Steering) (6) to the gauge side of Power Steering Analyzer (special tool #6800, Analyzer, Power Steering) (3), and connect P/S Adapter (special tool #8630-1, Adapter Power Steering) (5) to the hose assembly.
  3. Disconnect the P/S pump pressure line at the hydro-boost connection.
  4. Connect the hose from the valve side of the Power Steering Analyzer (special tool #6800, Analyzer, Power Steering) (3) to the hydro-boost line.
  5. Connect the hose from the gauge side of the Power Steering Analyzer (special tool #6800, Analyzer, Power Steering) (3) to the P/S pump pressure line at the hydro-boost connection.
  6. Proceed with the Flow and Pressure Test below.
scientia non olet · About LEMON Manuals