LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 152 (Heated Seats (Service Information)) >> Switch, Heated Seat >> Removal >> Front

Switch, Heated Seat: Removal: Front

WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Switch Pod Fasteners
GC0087598Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the battery negative cable.
  2. Remove the instrument panel center bezel. Refer to BEZEL, INSTRUMENT PANEL, CENTER, REMOVAL .
  3. Disconnect the lower switch pod electrical connector.
  4. Remove the lower switch pod fasteners (2) from the center bezel.
  5. Remove the switch pod from the center bezel.
scientia non olet · About LEMON Manuals