Diagnostic Test

WARNING: This page is about a different car, the 2016 RAM 3500 HD and 2016 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

CHECK THE ENGINE ACCESSORIES
NOTE:
If there are any Transmission DTCs present involving the Torque Converter or lock up operation, perform those diagnostic procedures before continuing.
1. Visually inspect the engine accessories for damage, binding or dragging.
  Were any problems found?
  
  Yes
  - Repair as necessary.
  - Perform the POWERTRAIN VERIFICATION TEST - 6.7L. Refer to POWERTRAIN VERIFICATION TEST - 6.7L .
  No
  - Go To 2
CHECK THE INTAKE SYSTEM
1. Visually inspect the entire Intake System for a restriction.
  Were any restrictions found?
  
  Yes
  - Repair as necessary.
  - Perform the POWERTRAIN VERIFICATION TEST - 6.7L. Refer to POWERTRAIN VERIFICATION TEST - 6.7L .
  No
  - Go To 3
CHECK THE EXHAUST SYSTEM
1. Visually inspect the entire Exhaust System for a restriction.
  Were any restrictions found?
  
  Yes
  - Repair as necessary.
  - Perform the POWERTRAIN VERIFICATION TEST - 6.7L. Refer to POWERTRAIN VERIFICATION TEST - 6.7L .
  No
  - Go To 4
CHECK THE FUEL DELIVERY SYSTEM
1. Refer to CHECKING THE FUEL DELIVERY SYSTEM and perform the CHECKING THE FUEL DELIVERY SYSTEM diagnostic procedure.
  Were any problems found?
  
  Yes
  - Perform the appropriate repair.
  - Perform the POWERTRAIN VERIFICATION TEST - 6.7L. Refer to POWERTRAIN VERIFICATION TEST - 6.7L .
  No
  - Perform the INTERMITTENT CONDITION diagnostic procedure. Refer to INTERMITTENT CONDITION - 6.7L .