LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1308 (6.4L - DTCS P1697 To P2634 - 2500 Hd & 3500 Hd) >> DTC Troubleshooting >> P2017-Intake Manifold Runner Position Sensor Circuit High >> Theory Of Operation

Theory Of Operation

WARNING: This page is about a different car, the 2016 RAM 3500 HD and 2016 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

The Short Runner Valve (SRV) is supplied 12 volts on the ASD Output circuit and is controlled by the Powertrain Control Module (PCM) using the SRV Control circuit which is driven by a Pulse Width Modulated (PWM) low side driver. The SRV has an internal position sensor that is monitored by the PCM through the SRV Signal circuit. The position feedback is supplied to the PCM as a PWM signal through the signal wire. The SRV is used to operate valves in the Intake Manifold to optimize airflow under varying operating conditions.