LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1288 (As69RC Automatic Transmission (Service Information) 3500 Hd) >> Sensor, Speed >> Removal >> Output Speed Sensor

Output Speed Sensor

WARNING: This page is about a different car, the 2016 RAM 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Output Speed Sensor
GC0109579Courtesy of CHRYSLER GROUP, LLC
  1. Raise and support the vehicle.
  2. Place a suitable fluid catch pan under the transmission.
  3. Remove the wiring connector from the output speed sensor.
  4. Remove the bolt holding the output speed sensor to the transmission case.
  5. Remove the output speed sensor from the transmission case.
scientia non olet · About LEMON Manuals