When Monitored And Set Conditions
WARNING: This page is about a different car, the 2016 RAM 3500 HD and 2016 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
When Monitored: continuously when the following condition is met:
- Whenever an A/C Cooldown Test is performed.
Set Conditions:
- This DTC is set whenever the A/C Cooldown Test is performed and the desired temperature drop is not achieved by the system.
Default Actions:
- The DTC will go to stored after a successful A/C Cooldown Test.
| Possible Causes |
|---|
| A/C SYSTEM WORKING IMPROPERLY |
Always perform the PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE before proceeding. Refer to HVAC PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE .