LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 125 (Lamps/Lighting - Exterior (Service Information)) >> Lamp, Tail Stop Turn >> Removal >> Bracket - Cab And Chassis

Bracket - Cab And Chassis

WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Tail Lamp Bracket, Outer Frame Rail & Anti-Rotation Tab
GC0137106Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the battery negative cable.
  2. Remove the tail lamp from the lamp bracket (1).
  3. Remove the screw (4) that secures the bracket to the outside of the frame rail (3).
  4. Remove the bracket from the frame.
scientia non olet · About LEMON Manuals