Switch, Brake Fluid Level: Installation: Installation

WARNING: This page is about a different car, the 2016 RAM 3500 HD and 2016 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

All views are typical.

Fig 1: Identifying Brake Fluid Level Switch Release Tab

Courtesy of CHRYSLER GROUP, LLC

Insert brake fluid level switch (2) into left side of reservoir. Be to push switch in until retaining tab (1) locks into place in reservoir.

Fig 2: Identifying Fluid Level Switch And Wiring Harness Connector
Courtesy of CHRYSLER GROUP, LLC
Connect wiring harness connector (2) to brake fluid level switch (1) mounted in brake fluid reservoir.