LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1231 (Propeller Shaft - 2500 Hd & 3500 Hd) >> Shaft, Drive, Front Heavy Duty >> Removal >> Removal

Shaft, Drive, Front Heavy Duty: Removal: Removal

WARNING: This page is about a different car, the 2016 RAM 3500 HD and 2016 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying HD Front Propeller Shaft
GC0107579Courtesy of CHRYSLER GROUP, LLC
  1. With vehicle in neutral, position vehicle on hoist.
  2. Remove exhaust crossover pipe.
  3. Mark a line across axle (3)/transfer case (2) companion flange and propeller shaft flange yokes for installation reference.
  4. Remove axle/transfer case companion flange bolts.
  5. Remove propeller shaft.
scientia non olet · About LEMON Manuals