LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1224 (Emissions Control - 2500 Hd & 3500 Hd) >> Exhaust Gas RECIRCULATION Valve >> Valve, Exhaust Gas RECIRCULATION (EGR) >> Removal >> Removal

Valve, Exhaust Gas RECIRCULATION (EGR): Removal: Removal

WARNING: This page is about a different car, the 2016 RAM 3500 HD and 2016 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable.
  2. Remove the engine cover.
  3. Remove the air cleaner body. Refer to BODY, AIR CLEANER, REMOVAL, 5.7L or BODY, AIR CLEANER, REMOVAL .
  4. Remove the front EGR tube. Refer to TUBE, EXHAUST GAS RECIRCULATION (EGR), CROSSOVER, REMOVAL  .
    Fig 1: Coolant Hose & Nut
    GC0174021Courtesy of CHRYSLER GROUP, LLC
  5. Remove the nut (2) and position the coolant hose aside (1, 3).
    Fig 2: EGR Valve Wire Harness Connector
    GC0174004Courtesy of CHRYSLER GROUP, LLC
  6. Disconnect the EGR valve wire harness connector (1).
    Fig 3: EGR Valve & Fasteners
    GC0173995Courtesy of CHRYSLER GROUP, LLC
  7. Remove the bolts (1), nut and the EGR valve
    Fig 4: EGR Gasket
    GC0174017Courtesy of CHRYSLER GROUP, LLC
  8. Remove and discard the gasket (1).
scientia non olet · About LEMON Manuals