Sensor, Oil Pressure: Removal: Removal

WARNING: This page is about a different car, the 2016 RAM 3500 HD and 2016 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Secondary Generator

Courtesy of CHRYSLER GROUP, LLC

If equipped, remove the secondary generator. Refer to GENERATOR, REMOVAL .

Fig 2: Oil Pressure Sensor Electrical Connector
Courtesy of CHRYSLER GROUP, LLC
Disconnect and isolate the negative battery cable.
Disconnect the oil pressure sensor electrical connector (1).

Fig 3: Oil Pressure Sensor
Courtesy of CHRYSLER GROUP, LLC
Remove the oil pressure sensor (1).