LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1200 (65RFE Automatic Transmission (Service Information) 1500) >> Housing, Transmission, Rear Extension >> Installation >> Installation

Housing, Transmission, Rear Extension: Installation: Installation

WARNING: This page is about a different car, the 2016 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: RTV Application Area
GC0143996Courtesy of CHRYSLER GROUP, LLC
  1. Apply a bead of RTV silicone to the extension housing.
    Fig 2: Extension Housing & Bolts
    GC0143995Courtesy of CHRYSLER GROUP, LLC
  2. Install the extension housing (1) on the transmission (3).
  3. Install the extension housing bolts (2) and tighten to 54 N.m (40 ft. lbs.).
  4. Install rear drive shaft. Refer to SHAFT, DRIVE, REAR LIGHT DUTY, INSTALLATION .
scientia non olet · About LEMON Manuals