LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1168 (3.0L Diesel - DTCS P0683-00 To P20C0-00 - 1500) >> DTC Troubleshooting >> P1287-00-NOX Sensor 1/1 Zero Offset Too Low >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2016 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

The Powertrain Control Module detects that the NOx Sensor 1/ reading is not reading zero during decel condition and zero fueling for two consecutive trips or the PCM has detected that the NOx Sensor 1/1 reading is not changing with engine conditions for two consecutive trips.