Pad, Vented Seat: Installation: Installation
WARNING: This page is about a different car, the 2016 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Seat back shown in illustration. Seat bottom similar.
- Install the replacement vented/heated seat pad (3) to the seat cushion (1) by placing it directly where the original pad was removed from.
- Carefully guide the vented seat pad flange (3) through the opening (2) in the seat back or seat bottom foam.
- Connect the heated seat electrical connector.
- Install the seat cushion or seat back cover.
- Reconnect the negative battery cable.
- Verify vented seat system operation.