Quad Cab

WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Rear Bench Seat - Quad Cab

Courtesy of CHRYSLER GROUP, LLC

1 - SEAT BACK - FOAM/COVER	9 - SEAT BACK FRAME
2 - SEAT BACK PIVOT BOLT 28 Nm (21 lbf-ft)	11 - LATCH ASSEMBLY
3 - LATCH ASSEMBLY	12 - SEAT BACK PIVOT BOLT 28 Nm (21 lbf-ft)
4 - CAB HOOK ISOLATOR (2)	13 - SEAT CUSHION FRAME BOLTS 55 Nm (41 lbf-ft)
5 - CAB HOOK ISOLATOR PUSH PIN (4)	14 - SEAT CUSHION FRAME
6 - HEADREST SLEEVE - SLAVE	15 - SEAT CUSHION FRAME BOLTS 55 Nm (41 lbf-ft)
7 - HEADREST	16 - SEAT CUSHION FOAM/COVER
8 - HEADREST SLEEVE - MASTER

Fig 2: Exploded View Of Rear 60% Seat - Quad Cab

Courtesy of CHRYSLER GROUP, LLC

1 - SEAT BACK FOAM/COVER	8 - LATCH ASSEMBLY
2 - CAB HOOK ISOLATOR	9 - SEAT CUSHION FRAME
3 - PUSH PIN	10 - LATCH ASSEMBLY
4 - HEADREST SLEEVE - SLAVE	11 - SEAT BACK PIVOT BOLTS (2) 28 Nm (21 lbf-ft)
5 - HEADREST	12 - SEAT CUSHION FRAME BOLTS (4) 55 Nm (41 lbf-ft)
6 - HEADREST SLEEVE - MASTER	13 - SEAT CUSHION FOAM/COVER
7 - SEAT BACK FRAME

Fig 3: Exploded View Of Rear 40% Seat - Quad Cab

Courtesy of CHRYSLER GROUP, LLC

1 - CAB HOOK ISOLATOR	8 - SEAT CUSHION FOAM/COVER
2 - PUSH PIN	9 - SEAT CUSHION FRAME BOLTS (4) 55 Nm (41 lbf-ft)
3 - HEADREST SLEEVE - SLAVE	10 - SEAT BACK PIVOT BOLTS (2) 28 Nm (21 lbf-ft)
4 - HEADREST	11 - LATCH ASSEMBLY
5 - HEADREST SLEEVE - MASTER	12 - SEAT CUSHION FRAME
6 - SEAT BACK FRAME	13 - LATCH ASSEMBLY
7 - SEAT BACK FOAM/COVER