LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1124 (Front Suspension & Wheel Alignment - 1500) >> Front, Independent Front Suspension >> Link, Stabilizer Bar >> Installation >> Installation

Link, Stabilizer Bar: Installation: Installation

WARNING: This page is about a different car, the 2016 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

4X4 shown in illustration, 4x2 similar.

Fig 1: Lower Control Arm, Stabilizer Bar, Link & Nuts
GC0173482Courtesy of CHRYSLER GROUP, LLC
  1. Install the stabilizer link (5) to the vehicle.
  2. Install the lower nut (6) and tighten to specifications. Refer to FRONT, INDEPENDENT FRONT SUSPENSION, SPECIFICATIONS .
  3. Install the retainers, grommets and upper nut (4) and tighten to specifications. Refer to FRONT, INDEPENDENT FRONT SUSPENSION, SPECIFICATIONS .
  4. Remove the support and lower the vehicle.
scientia non olet · About LEMON Manuals