Valve, Exhaust Gas RECIRCULATION (EGR) Airflow Control: Removal: Removal

WARNING: This page is about a different car, the 2016 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Engine Cover

Courtesy of CHRYSLER GROUP, LLC

Disconnect and isolate the negative battery cable.
Remove the engine cover (1).

Fig 2: Removing/Installing Intake Manifold Silencer
Courtesy of CHRYSLER GROUP, LLC
Remove the intake manifold silencer (2).

Fig 3: CAC Hose & EGR Air Flow Control Valve
Courtesy of CHRYSLER GROUP, LLC
Disconnect the Charge Air Cooler (CAC) hose (1) from the EGR air flow control valve (2).
Disconnect the EGR airflow control valve harness connector.

Fig 4: Inlet Air Temperature Sensor Wire Harness Connector
Courtesy of CHRYSLER GROUP, LLC
Disconnect the inlet air temperature sensor wire harness connector (1).

Fig 5: Remove/Install Fuel Injector Return Line
Courtesy of CHRYSLER GROUP, LLC
Remove the nut (3) and the fuel manifold (4).

Fig 6: EGR Air Flow Control Valve & Bolt
Courtesy of CHRYSLER GROUP, LLC
Remove the bolts (1) and the EGR airflow control valve (2).