Line, Diesel Exhaust Fluid Supply: Removal: Removal

WARNING: This page is about a different car, the 2016 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: DEF Tank Shield & Nuts

Courtesy of CHRYSLER GROUP, LLC

Disconnect and isolate the negative battery cables.
Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
Remove the nuts (2) and the Diesel Exhaust Fluid (DEF) tank shield (1).

Fig 2: DEF Pump Supply Line, Pump, Supply Line Heater, Quality Sensor & Level Sensor/Heater Wire Harness Connectors
Courtesy of CHRYSLER GROUP, LLC
Disconnect the DEF supply line heater wire harness connector (1).
Disconnect the DEF supply line Norma connector (5) to DEF pump. Refer to FITTING, QUICK CONNECT, STANDARD PROCEDURE .
Disconnect the supply lines from retaining clip on body.

Fig 3: Diesel Exhaust Fluid (DEF) injector & Wire Harness Connector
Courtesy of CHRYSLER GROUP, LLC
Disconnect the DEF supply line Norma connector (1) from the dosing injector. Refer to FITTING, QUICK CONNECT, STANDARD PROCEDURE .
Disconnect the supply line routing clip and remove the supply line.