LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1113 (Base Brakes (Service Information) 1500) >> Parking Brake >> Cable, Parking Brake >> Removal >> Right Rear Cable

Right Rear Cable

WARNING: This page is about a different car, the 2016 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Parking Brake Cable
GC0173473Courtesy of CHRYSLER GROUP, LLC
LOCKING PLIERS
1 - PARKING BRAKE CABLE
  1. Raise and support the vehicle.
  2. Lockout the parking brake cable (1).
  3. Loosen the brake cable at the equalizer and adjuster nut.
    Fig 2: Brake Cable End & Lever
    GC0173492Courtesy of CHRYSLER GROUP, LLC
    4- SUPPORT PLAT
    2- PARK BRAKE LEVER
    3 - CABLE END
  4. Remove the right cable from the front cable.
  5. Remove the right cable from the equalizer.
  6. Remove the cable from the frame bracket.
  7. Remove the cable from the axle bracket.
  8. Remove the cable bracket from the shock bracket.
  9. Remove the brake cable (3) from the brake lever (2).