Front - Light Duty

WARNING: This page is about a different car, the 2016 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Caliper, Adapter, Slide Pin Bolts, Brake Line & Banjo Bolt

Courtesy of CHRYSLER GROUP, LLC

Raise and support vehicle. Refer to HOISTING, STANDARD PROCEDURE .
Remove the wheel and tire assemblies.
Compress the caliper (2).
Remove the caliper slide pin bolts (3, 7).

Fig 2: Caliper, Adapter, Slide Pin Bolts, Brake Line & Banjo Bolt
Courtesy of CHRYSLER GROUP, LLC
Remove the caliper (2) from the caliper adapter (1).
NOTE:
Do not allow brake hose to support caliper assembly.
Support and hang the caliper.

Fig 3: Brake Pads, Anti-Rattle Clips & Caliper Adapter Mounting Bolts
Courtesy of CHRYSLER GROUP, LLC
Remove the inboard brake pad (3) from the caliper adapter (1).
Remove the outboard brake pad (4) from the caliper adapter (1).

Fig 4: Anti-Rattle Clips
Courtesy of CHRYSLER GROUP, LLC
Remove the anti-rattle clips (1) from the pad (2).