LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1113 (Base Brakes (Service Information) 1500) >> Hydraulic/Mechanical >> Adapter, Disc Brake Caliper >> Installation >> Rear

Adapter, Disc Brake Caliper: Installation: Rear

WARNING: This page is about a different car, the 2016 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Brake Pads, Anti-Rattle Clips & Caliper Adapter Mounting Bolts
GC0173502Courtesy of CHRYSLER GROUP, LLC
  1. Install NEW  caliper adapter mounting bolts (2) and tighten to specifications. Refer to HYDRAULIC/MECHANICAL, SPECIFICATIONS .
  2. Install the anti-rattle clips (5).
  3. Install the inboard (3) and outboard pads (4).
  4. Install the caliper mounting bolts and tighten to 30 N.m (22 ft. lbs).
  5. Install the tire and wheel assembly. Refer to WHEELS, STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals