Relay, Winch: Removal: Removal

WARNING: This page is about a different car, the 2016 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Relay Pack Cover

Courtesy of CHRYSLER GROUP, LLC

Remove the control unit (1). Refer to RELAY PACK, WINCH, REMOVAL .

Fig 2: Identifying Nuts, Battery Positive Cable & Bus Straps
Courtesy of CHRYSLER GROUP, LLC
Remove the nuts (2 and 3), disconnect the cables and remove the bus straps (4).

Fig 3: Identifying Nuts And Control Wires
Courtesy of CHRYSLER GROUP, LLC

NOTE:
Solenoid #4 shown, all others similar.
Remove the nuts (1) and disconnect the control wires (2).

Fig 4: Identifying Relay And Retaining Tab
Courtesy of CHRYSLER GROUP, LLC
Slide the solenoid (1) out of the retaining tab (2) and remove.