LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1110 (Engine Cooling System - 1500) >> Engine >> Sensor, Coolant Temperature >> Installation >> 3.0L

Sensor, Coolant Temperature: Installation: 3.0L

WARNING: This page is about a different car, the 2016 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Coolant Temperature Sensor
GC0172149Courtesy of CHRYSLER GROUP, LLC
  1. Install the coolant temperature sensor (1) and tighten to 11 N.m (8 ft. lbs.).
    Fig 2: Coolant Temperature Sensor Wire Harness Connector
    GC0158079Courtesy of CHRYSLER GROUP, LLC
  2. Connect the coolant temperature sensor wire harness connector (1).
  3. Position the upper radiator hose back.
    Fig 3: Removing/Installing Engine Cover
    GC0158138Courtesy of CHRYSLER GROUP, LLC
  4. Install the engine cover (1).
  5. Fill the cooling system. Refer to STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals