Left Fuel Rail

WARNING: This page is about a different car, the 2016 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

No sparks, open flames or smoking. Risk of poisoning from inhaling and swallowing fuel. Risk of injury to eyes and skin from contact with fuel. Pour fuels only into suitable and appropriately marked containers. Wear protective clothing.

Disconnect and isolate the negative battery cable.
Remove the left bank fuel tubes. Refer to TUBE(S), FUEL, REMOVAL .

Fig 1: Fuel Rail Return Line & Fuel Rail Solenoid Connector
Courtesy of CHRYSLER GROUP, LLC
Disconnect the fuel pressure solenoid wire harness connector (1).
Disconnect the fuel rail return line (2) and position aside.

Fig 2: Special Tool Remover-Installer, Fuel Rail Bolt
Courtesy of CHRYSLER GROUP, LLC
Using the (special tool #2025400090, Remover-Installer, Fuel Rail Bolt) (1), remove the bolts and the left fuel rail.