LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1103 (3.0L Diesel (Service Information) 1500) >> Turbocharger System >> Cooler And Hoses, Charge Air >> Installation >> Cooler

Cooler And Hoses, Charge Air: Installation: Cooler

WARNING: This page is about a different car, the 2016 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Charge Air Cooler (CAC) & Bolts
GC0158128Courtesy of CHRYSLER GROUP, LLC
  1. Install the Charge Air Cooler (CAC). Tighten the bolts to 20 N.m (15 ft. lbs.).
  2. Install the active shutter grille. Refer to GRILLE, ACTIVE SHUTTER, INSTALLATION .
    Fig 2: Right Charge Air Cooler (CAC) Hose Clamp
    GC0158210Courtesy of CHRYSLER GROUP, LLC
  3. Install the right CAC hose (1) and tighten the clamp to 6 N.m (53 in. lbs.).
    Fig 3: Left Charge Air Cooler (CAC) Hose Clamp
    GC0158074Courtesy of CHRYSLER GROUP, LLC
  4. Install the left CAC hose (1) and tighten the clamp to 6 N.m (53 in. lbs.).
  5. Connect the battery negative cable.
scientia non olet · About LEMON Manuals