LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1102 (3.6L Engine (Service Information) 1500) >> Cylinder Head >> Rocker Arm, Valve >> Removal >> Removal

Rocker Arm, Valve: Removal: Removal

WARNING: This page is about a different car, the 2016 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating Rocker Arms
GC0144231Courtesy of CHRYSLER GROUP, LLC
NOTE:

The LH cylinder head rocker arms are shown in illustration, the RH cylinder head rocker arms are similar.

  1. Remove the camshaft(s). Refer to CAMSHAFT, ENGINE, REMOVAL .
    NOTE:

    If the rocker arms are to be reused, identify their positions so that they can be reassembled into their original locations.

  2. Remove the rocker arm(s) (1).
scientia non olet · About LEMON Manuals