LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Heating & Air Conditioning (Service Information)) >> Specifications >> Fastener Torque

Fastener Torque

WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Description  N.m  Ft. Lbs.  In. Lbs. 
All Screws NOT Listed Below 1.1 - 10
A/C Compressor to Engine Specific fastener placement and torque pattern is required. See COMPRESSOR, A/C 
Installation for more information.
A/C Condenser Bolts 2.2 - 20
A/C Compressor Clutch Plate Bolt 19 - 168
A/C Expansion Valve Bolts 11 - 97
A/C Heater Control Screws 2.2 - 20
Air Ducts to Instrument Panel Screws 2.2 - 20
Blower Motor Screws 1.7 - 15
HVAC Housing to Engine Side of Dash Panel Nuts 6.8 - 60
HVAC Housing to Floor Bracket Bolt 6.8 - 60
HVAC Housing to Passenger Side of Dash Panel Nuts 6.8 - 60
Refrigerant Lines Nuts/Bolts 23 17 -