LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1093 (Electronic Control Modules (Service Information) 1500) >> Module, Vehicle System Interface >> Installation >> Installation

Module, Vehicle System Interface: Installation: Installation

WARNING: This page is about a different car, the 2016 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Snap the Vehicle System Interface Module (VSIM) into the module bracket.
    Fig 1: Vehicle System Interface Module (VSIM) Connectors
    GC0162901Courtesy of CHRYSLER GROUP, LLC
  2. Connect the wiring harness connectors to the VSIM.
  3. Install the kneeblocker. Refer to INSTRUMENT PANEL .
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals