LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Steering System) >> Column >> Wheel, Steering >> Installation >> Installation

Wheel, Steering: Installation: Installation

WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Do not reuse the old steering wheel bolt (a new bolt must be used)

  1. Install steering wheel to the column
    NOTE:

    Be certain that the steering wheel mounting bolt is tightened to the proper torque specification to ensure proper clockspring operation.

  2. Install the new steering wheel bolt. Tighten the bolt to 61 N.m (45 ft. lbs.).
  3. Install the driver's side air bag. Refer to AIR BAG, DRIVER, INSTALLATION .
scientia non olet · About LEMON Manuals