LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 102 ((Totally Integrated Power Module (TIPM) - Electrical Diagnostics - 1500, 2500 & 3500)) >> Diagnosis and Testing >> P1275-A/C Control Circuit 2 OVERCURRENT >> Set Condition:

Set Condition:

WARNING: This page is about a different car, the 2011 RAM Pickup. However, it is still accessible from the selected car via links, so may be relevant.

The TIPM detects the current draw on the A/C Clutch Control Output circuit is higher than the calibrated level.

scientia non olet · About LEMON Manuals