LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 102 ((Totally Integrated Power Module (TIPM) - Electrical Diagnostics - 1500, 2500 & 3500)) >> Diagnosis and Testing >> B2102-Ignition Run/Start Input High >> Set Condition:

Set Condition:

WARNING: This page is about a different car, the 2011 RAM Pickup. However, it is still accessible from the selected car via links, so may be relevant.

The TIPM has detected that the hardwired ignition switch input voltage from the Wireless Ignition Node (WIN) indicates that the ignition switch is in the run position, but the CAN bus message indicates that the ignition switch is the off position.

scientia non olet · About LEMON Manuals