Diagnostic Test
WARNING: This page is about a different car, the 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- VIN NOT CALIBRATED INTO PCM
- Using the scan tool, recalibrate the PCM with the proper VIN.
Did the DTC P0630 return?
Yes
- Replace the Powertrain Control Module (PCM) in accordance with the service information.
- Perform the POWERTRAIN VERIFICATION TEST - 6.7L. Refer to POWERTRAIN VERIFICATION TEST - 6.7L .
No
- Test Complete.
- Using the scan tool, recalibrate the PCM with the proper VIN.