Diagnostic Test

WARNING: This page is about a different car, the 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

POWERTRAIN CONTROL MODULE
1. Ignition on, engine not running.
2. With the scan tool, read DTCs.
  Are there other DTCs?
  
  Yes
  - Repair other DTCs first.
  No
  - Replace the Powertrain Control Module in accordance with the service information.
  - Perform the POWERTRAIN VERIFICATION TEST - 6.7L. Refer to POWERTRAIN VERIFICATION TEST - 6.7L .