LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 Base, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (6.7L Diesel - DTCS - P040D To P1191 - 3500 Cab & Chassis) >> Diagnosis and Testing >> P049D-EGR Control Position Exceeded Learning Limit >> Testing >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. OTHER EGR VALVE DTCS PRESENT 
    1. Ignition on, engine not running.
    2. With the scan tool, read DTCs.

      Are there any EGR circuit DTCs present?

      Yes 

      • Repair the other EGR Valve DTCs before proceeding.

      No 

      • Remove and clean the EGR Valve with Mopar EGR system cleaner.
      • Go To  2.
  2. EGR VALVE 
    1. Ignition on, engine not running.
    2. With the scan tool, erase DTC.
    3. Test drive the vehicle.
    4. With the scan tool, read DTCs.

      Did DTC P049D return?

      Yes 

      No