Diagnostic Test

WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

OCCUPANT RESTRAINT CONTROLLER ROLL OVER FEATURE DISABLED

Turn the ignition on.
With the scan tool read the ORC Roll Over Feature status Enabled or Disabled.
Does the scan tool show Roll Over Feature Disabled?

Repair
- With the scan tool select Enable to clear the active B2255 DTC.
- Perform the RESTRAINTS SYSTEM VERIFICATION TEST. Refer to RESTRAINTS-SYSTEM-VERIFICATION-TEST .