Lamp, UNDERHOOD: Removal: Bulb

WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Underhood Lamp

Courtesy of CHRYSLER GROUP, LLC

Disconnect and isolate the battery negative cable.
Insert a small flat bladed tool in the access slot between the underhood lamp housing (1) and the lamp lens (2).
Gently pry the lens until it unsnaps from the lamp housing.

Fig 2: Underhood Lamp Bulb Holder
Courtesy of CHRYSLER GROUP, LLC
Depress the bulb holder (2) inward far enough to disengage the terminal loops (3) of the bulb (1) and remove the bulb from the lamp housing (4).