LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 Base, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (5.7L - DTCS P2128 To U1418 - NGC - 3500 Cab & Chassis) >> Diagnosis and Testing >> P2128-Accelerator Pedal Position Sensor 2 Circuit High >> Set Condition:

Set Condition:

WARNING: This page is about a different car, the 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

When APP Sensor No. 2 voltage is too high. Idle is additionally forced any time the brake is applied or failed. Acceleration rate and Engine output are limited. One trip fault and the code will set within 5 seconds. ETC light is flashing.

scientia non olet · About LEMON Manuals