LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 Base, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (5.7L - DTCS P2128 To U1418 - NGC - 3500 Cab & Chassis) >> Diagnosis and Testing >> P2128-Accelerator Pedal Position Sensor 2 Circuit High >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Possible Causes 
(K29) APP SENSOR NO. 2 SIGNAL CIRCUIT SHORTED TO VOLTAGE
(K29) APP SENSOR NO. 2 SIGNAL SHORTED TO THE (F856) 5-VOLT SUPPLY CIRCUIT
(K29) APP SENSOR NO. 2 SIGNAL SHORTED TO THE (F855) 5-VOLT SUPPLY CIRCUIT
(K400) APP SENSOR NO. 2 RETURN CIRCUIT OPEN
APP SENSOR
POWERTRAIN CONTROL MODULE (PCM)

Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. Refer to  PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE  .