LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 Base, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 682 (Lamps/Lighting - Exterior (Service Information) 2500 Hd & 3500 Hd) >> Smart Beam >> Standard Procedure >> Smart Beam Calibration >> Notes

Smart Beam Calibration: Notes

WARNING: This page is about a different car, the 2014 RAM 3500 HD and 2014 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

New and unused replacement SmartBeam® units are shipped in calibration mode. Calibration is not needed after installation. If the SmartBeam® should lose calibration, perform the following steps outlined below.

scientia non olet · About LEMON Manuals